Technology placement plaster restoration tsemyankovoyi
V. I. Ternoviy, A. S. Molodid
Kyiv National University of Construction and Architecture
Annotation: The paper presents experimental results depending on the physical and mechanical parameters (porosity, compressive strength, the drag coefficient of diffusion of water vapor, the strength of adhesion to the base) of the proposed restoration mortar plaster of influence of technological factors (watertocement ratio, duration of mixing mortar mixture during its preparation, moisture basis, priming the basis of the area of contact layer, the method and amount of compaction soluble compounds, exposure duration in plaster formwork). According to the results of experimental studies developed a technology placement mortar plaster, which is based on the sequential performance of construction processes: training base contact layer arrangement, arrangement a plaster, creating a steamy layer. The identity of the proposed technology is subject to the parameters set by technological factors in our research framework that will provide improved sanitation properties to plaster. Results of laboratory tested in natural conditions and introduced into industrial practice.
Keywords: restoration, mortar plaster, technological factors, physical and mechanical properties, technology.
Pages: 159-165.
Link for citation: Ternoviy, V. I.; Molodid, A. S. Technology placement plaster restoration tsemyankovoyi. – Text : electronic. – In: Modern Industrial and Civil Construction. – 2012. – Vol. 8, N 4. – Р. 159-165. – URL: https://donnasa.ru/publish_house/journals/spgs/2012-4/01_ternovoj_molodid.pdf (date of access: 16.09.2024). (in Russian)
Vol. 8, N 4 (2012)Journal: Modern Industrial and Civil Construction
Publish house: Donbas National Academy of Civil Engineering and Architecture